How to do the water inlet and outlet of the 808nm diode laser hair removal machine?
When you receive a new 808nm diode laser hair removal machine, first you need to check whether the appearance of the machine is intact. Second, you need to add water to the machine before starting the machine.
The following is the process of adding water to the machine and precautions:
1. Why do I need to add water to the instrument?
The highly configured laser hair removal device has a relatively stable water cooling system, which ensures a longer working life and longer service life of the laser.
2. Before adding water, you need to be familiar with several signs: water ingress, splashing, and drainage.
Water in and out of hair removal machine
3. Water Split: First, you should add a CPC connector as a bleed valve;
Water inlet: Here, a CPC connector with a funnel should be used to inject water into the machine; drain pipe: After filling with water, water will flow out of the drain pipe.
4. Water quality requirements:
Generally good laser hair removal devices use precision micro-channel technology imported from Germany. Their requirements for water quality are relatively high. You need to use high-grade pure water or high-grade distilled water. You cannot use tap water or mineral water. If conditions permit, it is best to use deionized water.
5. Water capacity requirements:
Generally, the water tank of our conventional instrument only needs 2.5-3L. Since our laser hair removal device has a good compressor refrigeration system, only enough water supply is needed to ensure the normal operation of the compressor and the machine can work continuously. Therefore, our diode laser only needs to add about 2.8L of water, that is, 4 to 5 bottles (500ml) of conventional pure water. But there are some machines without a compressor, the water capacity will be larger, 7-8L or even 10-12L are possible.
6. Drain and discharge steps:
Precision instruments such as the 808nm laser hair removal machine require regular maintenance and monthly water changes. To change the water, you first need to insert a drain nozzle in the water overflowing as a valve, and then add a nozzle with a water pipe to the drain to drain the water. Then don't forget to repurify the machine with pure water. If you do not use the machine for a long time in winter, please remember to drain the water inside the machine to prevent the water pipe or water tank from freezing.
